CLEARAUDIO Nano Phono V2
The nano phono V2 phono preamplifier can not be upset by anything.
Outside interference is no longer an issue with this fine piece of engineering.
Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward for the effort is up to 84 decibels signal-to-noise ratio. The input impedance can be regulated by the listener. Thus, there is no loss of sound when using different moving magnet and moving coil cartridges, which can play their sound volume unlimited.
The nano phono headphone V2 also has a powerful headphone output in its solid aluminum housing for undisturbed listening pleasure at the highest level.
500 grams (preamplifier and power supply)
10 V eff. (1 kHz), 0-10 adjustable
- 85 mm
- 106 mm
- 25 mm
MATERIAL / COLOR
Aluminum silver and black
|GAIN @ 1 KHZ||34 dB (MM mode)
65 dB (MC operation)
|INPUT IMPEDANCE||47 kOhm / 220 pF (MM operation)
Individual (MC operation)
|MM / MC – INPUT||switchable with jumper (on bottom side)|
|SUBSONIC FILTER||Switchable with jumper (on underside)|
|CUTTING CHARACTERISTIC EQUALIZATION||± 0.4 dB @ 20 Hz – 50 kHz|
|SIGNAL / SIGNAL-TO-NOISE RATIO||81 dB (A) (MM operation)
70 dB (A) (MC operation)
|CROSSTALK ATTENUATION||> 80 dB @ 1 kHz,
Opposite channel short-circuited
|MAX. OUTPUT VOLTAGE||10 V eff. (1 kHz)|
|POWER CONSUMPTION||Max. Power consumption: 2.3 Watt
in operation: 2.3 Watt
Standby mode: < 0.3 Watt
Off: 0.0 Watt
|VOLTAGE SUPPLY||±18 V DC / 300 mA (external plug-in power supply, plastic housing)|
|WEIGHT||approx. 500 g (preamplifier and power supply)|
|DIMENSIONS (W/D/H in inches)||3.35 x 4.17 x 0.98|
|DIMENSIONS (W/D/H in mm)||85 x 106 x 25|